Explanation : . According to the Turkish Standards Institute's Surveillance Inspection Center of the internal circular issued after that the "CE" marking required to bear some Products Import Controls Communiqué (9 No. Product Safety and Inspection Communiqué) In the context of the inspections,, the products covered in this Communiqué cited inspected due to the increase in complaints relating to incorrect documents and unsafe products on the market it will be tested if necessary. In case of acceptance of sending tests routed the products if they are accepting applications will be finalized negatively payable under the testing fees currently earning Institute by the importer, regardless of the test results, guidelines and tariffs are to be done by testing the actual control of the company. In case of cancellation of the test phase testing firm; The fee will be charged if the tests that were from the company. Other Regulations (LVD, EMC vb.) with "Eco-Design" (Energy efficiency audits) Audits conducted in the framework of energy efficiency for products directed to the scope and tests (physical examination, such as document review) Will continue with the present case and further tests will be performed in reduced.

T.C.

TURKISH STANDARDS INSTITUTE

Inspection Surveillance Center Presidency

17.07.2017

Number : 42569461-010.06.01.00-E.284965

topic : Internal Circulars

THE DOCTOR SURVEILLANCE CENTER PRESIDENCY

Interest : a) T.C. MINISTRY OF ECONOMY AND SUPERVISION DIRECTORATE GENERAL PRODUCT SAFETY 11.07.2017 dated 75804 No. Text

b) T.C. MINISTRY OF ECONOMY AND SUPERVISION DIRECTORATE GENERAL PRODUCT SAFETY 17.07.2017 dated 78239 No. Text

CIRCULAR(MGMB UMGGB-2017/8)

Ministry of Economy interest (a)'Registered letter with "CE" marking required to bear some Products Import Controls Communiqué (9 No. Product Safety and Inspection Communiqué) In the context of the inspections,, the products inspected and submitted the documents referred due to symptoms related to improper and unsafe products on the market suggests that the increase be tested if necessary.

According to this, Principles and procedures will be based in the inspections conducted, Ministry of Economy interest (b) prepared in accordance post is located in the article below appeared:

1. Items will be sent to the test and will be determined by TAREKS Our Institute belgenet system added to the product information on the application of "You Get Samples" section of the "Yes" will be. In this case, the products will be held in the first place CE marking control, CE marking does not exist without the operation without sending samples to the laboratory and "RED: AUDIT RESULTS "will be finalized by. but the mere de facto control falling for testing products will continue to be directed to non-implementation of the regulatory framework.

2. Bonded brand in the determinations made in the field, model vb. The information identifying the product application range and found to overlap with CE marked and documented with the, EC declaration submitted by a manufacturer with shipment to the relevant laboratory tests to be done by taking samples of the product will be provided.

3. EC Declaration of Conformity, Will be controlled by the direction represent the product, There will be no control of content and timeliness. EC Declaration of Conformity missing / wrong, even if the specified standards, By laboratory on the article's technical and constructional characteristics (which is essential in terms of safety and energy efficiency when the relevant application, domestic walkable and can be completed in a relatively short time) "Reduced tests" will be made. In such cases,, also additional information and documents from the companies and / or statement of the standard would be desirable.

4. pre-tested and found to be outside the scope of products that can be substantiated will not be sent to the testing and application of such items or "EXCLUDED: AUDIT RESULTS "will be finalized. "Option parts" in the scope of products will continue existing practices, It found that the components and the products will be tested which may be terminated by confirming the documents shape legislation. The company's products if it did not agree to send the test, Based on the company's statement written application "RED: AUDIT RESULTS "will be finalized as negative.

5. The samples sent to the laboratory for testing seen at CN Regulations and standards and according to which criteria that are relevant aspect to be tested, CN continues to control the product without Being tested is determined to be outside the scope of all the provisions of the directive "EXCLUDED: AUDIT RESULTS "will be finalized.

6. the test to be applied in accordance with the relevant standards or standards "Reduced Testing" It will be limited by. Applications will be finalized by the test can be done at home. Reduced testing will be determined by the Ministry of Economy.

7. All or a portion of the necessary tests done, Our institute institute in case of necessity be made in other laboratories under the supervision of.

8. Other Regulations (LVD, EMC vb.) with "Eco-Design" (Energy efficiency audits) Audits conducted in the framework of energy efficiency for products directed to the scope and tests (physical examination, such as document review) And it will continue with the existing case reduced further tests will be performed.

9. In case of acceptance of sending tests routed the products to be made for testing the actual control of the company if they are accepting applications will be finalized as negative regardless of the test results from the testing fee for the institute by the importer is payable under the current fee guidelines and timetables. In case of cancellation of the test phase testing firm; If the fee to be collected from the tests that were firm and audit "RED: AUDIT RESULTS "will be finalized by.

10.Tests will be negative until the detected substance, The substance will not continue after the negative.

11.Consumer product safety should be included on the product or require to be notified of test results and other technical information in case of the absence of appropriate exit, market surveillance and supervision of the application can be made CONDITIONAL ACCEPTANCE-TAL DEFICIENCY: It will be finalized by the AUDIT RESULTS.

12.Companies with different documents in order to avoid testing (declaration / bill of lading / summary statement like) Inspection Surveillance Center Presidency shall be notified to be transferred to the Ministry of Economy to deliberate issues considered in case of detection of individual applications made to mislead the control dividing the party.

13.of ancillary equipment that may be necessary during the test to be applied to the sample (adapter, command, load, foot, coupling and so on.) in the absence of sample packs, said auxiliary equipment can be requested from the applicant company, In the case of ancillary equipment to meet the demand of the company in question will be reported to the company to use its counterparts. The company does not accept the use of equivalent status if the control equipment "RED: AUDIT RESULTS "information will be given to the company that resulted in the. In case of accepting the request of the company auxiliary equipment necessary for the realization of the tests or equivalent, costs will be provided by the institute to be charged by the company. In cases where the mere de facto control of the company auxiliary equipment or be able to be supplied by TSA inspection will be carried out by the method of the test report in the framework legislation, EC declaration previously attached to the system in such a case will be examined in terms of content-date and will be requested to revise where necessary.

14.TAREKS test by routing application 2017/1 The current scope of the Communiqué No. Product Safety and Inspection, In the application screen "Get Samples" section of the "Yes" will be considered a precedent for products test report. This will be based on inspections, CIRCULAR (MGMB UMGGB-2016/1) “17. subsequent Imports (Peer)"According to the article "Searching the first two tests of the actual audit report" The application has been removed in force. 12 positive reports of any way directed to the actual inspection and testing of products subjected in months, It may be used as the said article in accordance with normal practice peer. However,, In the application screen "Get Samples" section of the "Yes" referred to operational control and information all products in any case it will certainly be tested.

15.Sample, testing and matters related to the above-mentioned non-objection "Import Conformity Assessment Procedures and Principles" by the Ministry of Economy prepared in accordance with the provisions of Circular applies Import Control Guide.

16.The process of Meru brought into line with the regulations made under the electronic media, and forming the request form as feedback forms and publishing, Ensuring the changes to be made regarding the control over our systems, such as the Institute belgenet Inspection Surveillance Center Presidency, Testing and Calibration Center Department and Information Technology Department will be held in coordination. also, Information on the number of samples and relevant laboratory tests directed to the product to be released out of currency and will be followed QDMS.

17.Application 14.07.2017 Date and will begin to include references to the following.

I would ask that the need.

e-signed
Mehmet BOZDEMİR
Secretary General

I: -Interests articles

Distribution :
Inspection Surveillance Center Presidency
Head of Certification Center
Testing and Calibration Center Presidency
Standard Preparation Center Presidency
Transport and Logistics Systems Center Presidency
Import Coordination Directorate in Ankara
Istanbul European Side Export Directorate
Istanbul Anatolian Side Export Directorate
Directorate of Izmir Imports
Import Directorate of Mersin
Import Directorate of Tekirdag
Adana Certification Department
Antalya Directorate of Certification
Certification Directorate of Denizli
Corum Certification Department
Bursa Certification Department
Kayseri Certification Department
Certification Directorate of Eskisehir
Certification Directorate of Gaziantep
Konya Directorate of Certification
Malatya Certification Department
Trabzon Certification Department
Van Certification Department
Certification Directorate of Samsun
Sakarya Certification Department
Hatay Representation
Igdir Representation